The majority of furnace repairs will cost between $50-$150 per hour for labor.
How Much Does Furnace Repair Labor Cost?
It’s always wise to budget for the cost of parts and labor ahead of time. A dirty filter is undoubtedly the quickest fix associated with a furnace.
It goes without saying the more complex the repair or replacement, the higher the labor costs will go.
Here are the common costs for furnace repair labor:
- Lowest Cost: $50 per hour.
- Average Cost: $100 per hour.
- Highest Cost: $150 per hour.
Furnace Repair Cost Factors
Besides labor, there are a few main factors that will impact the overall cost of your furnace repairs. Those factors are outlined below.
Furnace Age
As your unit ages, the likelihood of something failing increases. Worn down heat exchangers or older circuit boards can cause your repair bills to go up dramatically.
In addition, there are many vintage models that cannot accommodate newer, high-efficiency components, meaning expensive, custom-made repairs will be necessary.
Fuel Type
The specific fuel type of the furnace, whether it is gas, oil, propane, or electric, will dictate the parts needed for repairs. Each type of fuel has its own specialty parts, bringing different repair costs along with them.
Maintenance Needs
It’s important for homeowners to always keep up with maintenance needs. This will help extend your furnace’s lifespan. Furnace inspections cost as little as $80, while tune-ups typically start around $125.
It’s recommended to change the filter out every 90 days. They are relatively inexpensive yet undoubtedly play a vital role in the health of the furnace.
Furnace Parts
Here is a quick breakdown of furnace repairs by part:
| Furnace Part | Average Cost |
| Thermostat | $100-$600 |
| Blower Motor | $150-$2,000 |
| Gas Valve | $200-$600 |
| Flame Sensor | $150-$250 |
| Ignitor | $150-$500 |
| Draft Inducer Motor | $200-$1,500 |
| Transformer | $100-$175 |
| Flue Pipe | $400-$800 |
| Oil Combustion Chambers | $100-$600 |
| Control Or Circuit Board | $200-$600 |
| Relay Or High Limit Switches | $150-$300 |
| Furnace Filter | $1-$35 |
| Heat Exchanger | $100-$1,500 |
| Coils | $600-$2,000 |
| Burners | $150-$450 |
Conclusion
A cozy night at home can quickly go awry anytime your furnace breaks down. Simple furnace repairs can cost as low as $132 to fix, with more extensive repairs costing as high as $501. Homeowners can expect to pay an average of $317 for repairs.
In Arizona, it is possible for furnace repair to cost up to $683, but homeowners can expect to stay within the range stated above. As detailed, the total cost will depend on a few things, including type of furnace, parts needed, labor rates, and location.
*These are cost estimates according to Angi. Contact the experienced team at Tru Comfort Heating and Cooling for more information today!
Tru Comfort Heating & Cooling In The Phoenix Valley
At Tru Comfort Heating & Cooling, we deliver reliable, efficient, and cost-effective solutions to enhance comfort and water quality. Whether you need HVAC installation, repair, maintenance, or water treatment solutions, our team is here to assist you every step of the way. Contact us today for exceptional service from an insured and bonded HVAC company. Experience reliable and efficient solutions that exceed your expectations.
